Basic Stress-Strain State of a Multilayer Symmetric Circular Arch under the Action of Normal Forces in the Middle Section. Report 1. Arches of High Curvature / Аналітичний розв’язок задачі згину багатошарової симетричної кругової арки під дією нормальної сили у середньому перерізі. Повідомлення 1. Арки великої кривизни

Simple item page
dc.contributor.authorКовальчук, Станіслав Богданович
dc.contributor.authorГорик, Олексій Володимирович
dc.date.accessioned2019-08-06T08:14:12Z
dc.date.available2019-08-06T08:14:12Z
dc.date.issued2019-06
dc.descriptionCircular arches are common elements of construction and machine building structures. They can be both individual components and reinforcing elements of thin-walled casings. An important case of arches deformation is the symmetrical folding in its own plane surface under the action of concentrated force. The resistance of homogeneous isotropic arches is sufficiently investigated. However, the mechanics of multilayer arches deformation is studied considerably less, which creates additional obstacles to introducing such elements in designing practice. The purpose of this work is a theoretical study of the basic stress-strain state (SSS) of a symmetrically fixed multilayer arch under the action of concentrated normal force in the middle section by developing the analytical solution of the corresponding problem. The first part of the article deals with the statement of the problem, the prerequisites, the main stages of developing its general solution and the conditions that simulate different methods of fixing the ends of a solid arch and arch with a pinconnected joint in the middle section. In the course of solving the problem, the studied arch symmetry enabled to consider only its half separated over the middle section, taking into account the corresponding static and kinematic conditions on the ends. The SSS of such element is similar to the SSS of a circular multilayer bar with loads at the ends, which enabled to use the exact solution of elasticity theory of the corresponding problem obtained by the authors. The solution developed in such a way corresponds to the exact solution of the problem on the most part of the arch and, near the loaded section and the fixed ends, gives a simplified description of the SSS without taking into account its local distortions. The obtained general correlations depend on six unknown parameters in the middle section. For the purpose of their determining, static and kinematic conditions which correspond to different methods of fixing the ends of the arch and the connection of its halves were obtained. To demonstrate the possibilities and approbation of the obtained solution, the authors gave the results of determining the SSS of a four-layer arch with rigid ends’ fixation with the ratio of the mean radius to the section height that is equal to 1.75, as well as the results of additional calculations at increasing the mentioned ratio to 15. The developed solution enables to identify the SSS of symmetric composite arch elements and rings in order to study their static strength and stiffness and can also be used in solving more complex deformation problems of multilayer curved elements of constructions.uk_UA
dc.identifier.doi10.31210/visnyk2019.02.36
dc.identifier.urihttps://dspace.pdau.edu.ua/handle/123456789/5501
dc.subjectmultilayer archuk_UA
dc.subjectorthotropic layeruk_UA
dc.subjectconcentrated forceuk_UA
dc.subjectstrainuk_UA
dc.subjectdisplacementuk_UA
dc.subjectбагатошарова аркаuk_UA
dc.subjectортотропний шарuk_UA
dc.subjectзосереджена силаuk_UA
dc.subjectнапруженняuk_UA
dc.subjectпереміщенняuk_UA
dc.subjectмногослойная аркаuk_UA
dc.subjectортотропный слойuk_UA
dc.subjectсосредоточенная силаuk_UA
dc.subjectнапряжениеuk_UA
dc.subjectперемещениеuk_UA
dc.titleBasic Stress-Strain State of a Multilayer Symmetric Circular Arch under the Action of Normal Forces in the Middle Section. Report 1. Arches of High Curvature / Аналітичний розв’язок задачі згину багатошарової симетричної кругової арки під дією нормальної сили у середньому перерізі. Повідомлення 1. Арки великої кривизниuk_UA
dc.typeArticleuk_UA
local.department4.4 Кафедра загальнотехнічних дисциплінuk_UA
Files
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
Bulletin of PDAA, Iss.93,270-283(2019).pdf
Size:
1.44 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Фахові видання